Blog

After reaching a safe location:

• Begin fixing the flat tire.
• Use a wrench to loosen the tire's lug nuts and elevate the car using a jack to remove the pressure from the wheel.
• Remove each lug nut and keep them aside.
• Once all nuts are removed, remove the wheel from the axle and place it aside.

Position your spare tire onto the hub of your axle and screw on each lug nut partially, just enough to keep it in place. Don't tighten them too much at this point to avoid any damage. Gradually tighten each lug nut with…

Is the foggy, yellowing appearance of your car's headlights impairing their effectiveness while driving at night? This common problem can occur due to exposure to environmental factors over time. Fortunately, you don't have to pay a professional to restore your headlights to their former clarity. A DIY headlight restoration is an easy and cost-effective solution.

To get started, gather your materials, including sandpaper (of varying grits), a microfiber cloth, a spray bottle filled with water, and a headlight restoration kit. 

Gather the necessary tools: You will need a set of jumper cables and a vehicle with a charged battery to jump-start the dead car. It's essential to use jumper cables that are in good condition and have sufficient length to reach both vehicles comfortably.

Park the vehicles: Park both vehicles in a safe and well-ventilated area, away from traffic. Make sure both cars are in "Park" or "Neutral" and the ignition is turned off. Engage the parking brake on both vehicles.

Identify the battery terminals: Locate the battery terminals on both vehicles. The positive terminal is usually marked with…

Brake pads form a fundamental part of any car's brake system by providing friction when the brakes are pushed down and helping to stop your vehicle in a secure, regulated manner. As you press on the pedals, heat is generated from this friction. Still, it is quickly dissipated through the caliper assembly into the surrounding air to ensure that no damage can be done while slowing down or stopping.

When it comes to brake pads, you have several options. From ceramic and semi-metallic to organic compounds, each one provides its own unique set of features. 

Warmer spring weather in Phoenix also often brings sudden spring storms. These storms can cause water to accumulate on the road. If you speed through standing water in your car, you could end up hydroplaning. This is when your car is gliding along on the water, and you don't have any steering control. Here are some basic tips from Bueno Used Cars to help you avoid this scary situation.

The most important tip is to make sure you slow down when the roads are wet. Driving slower will help your tires grip the road better so that they can…

While we love our furry friends, we do not always love what they leave behind. Pet hair can be especially frustrating in a vehicle when it gets into every nook and cranny. Rather than leaving your pet at home, however, you can follow a few steps to reduce the amount of fur that gets left in your car.

Preventing fur from getting into your car in the first place is going to be easier than getting it out once it is there. For that reason, the team at Bueno Used Cars recommends keeping up on your animal's grooming. A…

Driving around Phoenix with a little one in tow makes finding the right car seat for your child a top priority. Car seats are sized based on a child's weight and height, so ensuring you're selecting the appropriate-sized car seat will improve the safety of your child in the event of an accident. Along with differing sizes and configurations, car seats have different methods of attachment. You can typically slide the car seat belt through the back or lap of a car seat or opt for integrated LATCH hook installation in newer vehicles.

Some car seats can be…

Maintaining the cleanliness of your car's engine helps to ensure its longevity and performance, as well as reduce any risks associated with damage or breakdowns. Cleaning the engine can help to prevent corrosion and rusting.

You don't need to be a certified mechanic to clean your engine; it's actually quite easy and straightforward. Open the hood and make sure the engine is cool before you begin. If it has been running recently, wait a few hours until it has cooled down completely. Once the engine is cool, you can begin the cleaning process. 

To install a child safety seat in your vehicle, you first need to figure out where the seat will be. The safest place is usually in the middle of the back seat, but that isn't always an option. If you can't place your child seat in the center seating position, either the driver's side or the passenger's side will do. Try to choose the position that you think is safest.

Next, determine whether or not your car seat allows for LATCH installation. This stands for Lower Anchor and Tether for Children.

Auto-dimming rearview mirrors use special electrochromic technology to reduce glare from the headlights of cars behind the vehicle. The mirror is coated with a layer of transparent material that darkens when an electrical current passes through it. When the current stops, the mirror returns to its original state.

These mirrors can detect visible light and ultraviolet rays from the headlights of the vehicles behind you. When it detects a certain level of light, an electrical current is created and sent through the mirror’s coating, causing it to darken. This